Crego Metal Systems, Inc.
Crego Metal Roofing, Inc.
8601 4th St. NW
Albuquerque, NM 87114
(505) 897-0214
STANDING SEAM ROOFING SYSTEM
For Commercial, Industrial, Institutional and Residential Applications
CREGOSEAM™(CREGO-MS)—
Crego Metal Systems’ CREGOSEAM brand metal roofing panels
Crego Metal’s 1-1/2" CregoSeam™ is a mechanically seamed roofing system designed for either open-framed construction or solid decking. CregoSeam™ offers the designer an architectural system that contains clean roof lines with a minimum of shadow. This panel also offers a smooth transition from the roof to the fascia with the aid of knee caps to create visual continuity, but with the structural strength and weather-tightness of a mechanically seamed system. The minimum recommended slope is 1" : 12".
Product Characteristics: 
- All seams are mechanically locked with an electric seamer
- Seam height is 1-1/2"
- Floating clips are recommended for panel lengths of 30 ft. or more and will allow for expansion and contraction
- Geocel mastic insures weathertightness
- Materials: Galvanized, Galvalume™ or Aluminum with a bare finish or a Kynar 500™ or Hylar 5000™ coating; or Copper
- Thickness: Available in 26, 24 or 22 guage steel; .032 aluminum; or 16 or 20 oz. copper
- Colors: Many colors available from manufacturer's standard color chart or a custom color with a minimum quantity of 5000 pounds
- All panels are supplied with Striations unless specified otherwise. Striations are provided as an aethetic effect as well as to minmize the possibility of oil canning. Oil canning is naturally inherent in sheet metal and is not cause for rejection. Crego Metal uses only top quality materials specially designed for rollforming applications, which are tension-leveled to help minimize oil canning.
CREGOLOCK™(CREGO-SL)—
Crego Metal Systems’ CREGOLOCK brand metal roofing panels
Crego Metal's CregoLock™ is an integral snap-lock roof system designed for solid decking. CregoLock™ offers the bold profile look that creates clean rooflines. The seam can be notched and bent to provide a smooth transition from roof to fascia or mansard. The minimum recommended slope is 3": 12". Two-ply of 30 pound felt is recommended as an underlayment.
Product Characteristics:
- Integral snap-lock system allows for ease of installation
- Seam height is 1-3/4"
- Concealed one piece clips and fasteners
- Geocel mastic insures weathertightness
- Materials: Galvanized, Galvalume™ or Aluminum with a bare finish or a Kynar 500™ or Hylar 5000™ coating; or Copper
- Thickness: Available in 26, 24 or 22 guage steel; .032 aluminum; or 16 or 20 oz. copper
- Colors: Many colors available from manufacturer's standard color chart or a custom color with a minimum quantity of 5000 pounds
- All panels are supplied with Striations unless specified otherwise. Striations are provided as an aethetic effect as well as to minmize the possibility of oil canning. Oil canning is naturally inherent in sheet metal and not cause for rejection. Crego Metal uses only top quality materials specially designed for rollforming applications, which are tension-leveled to help minimize oil canning.
